黄色片黄色片黄色片亚洲黄色片,欧美日韩不卡高清在线,国产亚洲情侣久久精品,久久中文字幕av第二页

一、主要用途

適用于棉織品，毛衣或其他要求漿料印在織布上無手感的印花效果，乳液穩定性良好，重復印率高，清洗方便，印花后織物有良好的皂洗性。

二、性狀

1、外觀：乳白色糊狀。

2、離子性：陰離子。

3、粘度：110000-130000CPS。

4、組成：特殊共聚物。

5、PH值：7.0-8..0

6、貯存常用溫,密閉一年。

三、特性

G50-2高遮蓋白漿：穩定性良好，精細光滑，紋理清晰，接近拔印效果，無味，透氣性好，能在深色布上進行彩色印花的高遮蓋水漿

G51-2仿彩漿：穩定性良好，手感超柔軟，精細光滑，紋理清晰，接近拔印效果，無味，透氣性好，能在深色布上進行彩色印花的高遮蓋水漿

G51-3超柔軟拔透：穩定性良好，手感超柔軟，得色率高，精細光滑，紋理清晰，接近拔印效果，無味，透氣性好，能在深色布上進行彩色印花的高遮蓋水漿

四、印花工藝

本品選用100-120目絲網，一般印2次2刀即可。

印花-干燥-熱處理：130°C-150°C過熱1-5分鐘，如需要調色，直接用彩印漿+白漿調入色種5%以內。

五、注意事項：

1）如印制深色易掉色的布料，必須要檢驗顏色是否回升華到漿料表面，以免造成不必要的損失。

2）由于印花面料的多樣化，和一些外在的不確定因素做大貨之前先小樣實驗確定以后方可批量生產。未確定情況使用或操作不當引起的質量問題本公司概不負責

Other detailed information

一．Main usage

It is suitable for cotton fabrics,wool or other require the paste prints on fabrics with no hand feel printing effect, emulsion has good stability,good ability of reprinting,easy to clean,after printing, the cotton fabric has good soaping performance.

二．Characters

1.Appearance : milky white paste

2.Ionic: anion

3.Viscosity:110000-130000CPS

4.Composition:special polymer

5.PH Value:7.0-8.0

6.Store at room temperature,airtight for one year.

三．Features

G50-2 high covering white pulp：Good stability,fine and smooth,clear textures,close to discharge print effect,odorless,good permeability,which is a high covering slurry that can be printed on dark cloth.

G51-2 imitated colored pulp：Goodstability,super soft hand feel,fine and smooth,clear textures,close to discharge print effect,odorless,good permeability,which is a high covering slurry that can be printed on dark cloth.

G51-3 super soft discharge clear pulp：Good stability,super soft hand feel,good color yield rate,fine and smooth,clear textures,close to discharge print effect,odorless,good permeability,which is a high covering slurry that can be printed on dark cloth.

四．Printing technology

This product chooses 100-120mesh silk screen, print two times and scrape two times as usual.

Printing-drying-heat pressure:Over flashing1-5minutes at 130-150℃，if need adjust color,using discharge like color+white paste within 5% pigment.

五．Notes:

1)If print on dark fabric which is easy to fade,must have a test that the color whether sublimate on surface of paste, in order to cause unnecessary losses.

2)Due to variety of printing fabric and some uncertain factors outdoor,must have a test before in a batch production.Our company is not responsible for quality problem which caused by wrong operation or using under uncertain condition.